How to choose the right ring size?

You have a reference ring.

Print this gauge and follow the instructions.

During printing it is important not to adjust the ladder in order to keep the right proportions, to make sure you check that the rule measures 10 cm.

You do not have a reference ring.

You must first determine the morphology of your finger by following our guide below.

Measure your finger using a thread or a tape.

Make sure you Measure the finger you will wear your ring Because finger laps may vary from one hand to the other.

ADVICE

If you hesitate between two sizes, we advise to choose the largest.

Measure your finger preferably at the end of the day In a temperate place because the tower of the fingers can vary.

Above all, do not hesitate to contact us via our Contact form If you are not sure of your size, we will be delighted to help you.

Measure the circumference of your finger at the joint level in mm and compare it to the figures located under the circles.

If the base of your finger is wider than the rest of the finger, take the measurement there.

If the knuckle is wider than the rest of your finger, take the measurement there. The ring needs to resist a little when you put it on.

If your finger is straight, simply take the measurement at the base.

Once your ring size is measured, filter our full selection

(Re)discover our selection of rings

What our visitors often ask, you're probably wondering

Visit the FAQ